The Tree of Heaven Project - Tonal variations and compliment materials

The consultation for the first piece of furniture has begun and the client would like a writing desk in dark tones, a reddish-brown colour markedly different from the natural pales of the Ailanthus timber.

I prepared several samples from the Ailanthus timber finished with oil-based stains from browns and reddish browns to reds and purples to silvery blues. The Ailanthus timber does not take water-based stains well and only oil-based products seem to work their way into the grain well.   The natural colour is pale yellow white like American ash and can also be scorched very black.  All of the samples were finished off with three coats of Osmo satin.

Making samples is an art in itself and an important part of the consultation process with the client.  The knowledge of the clients varies greatly but most people who come to me are either wood enthusiasts or interiors professionals who know exactly what they want, even if its not a so-called natural colour or tone.  Either way, the tone and colour of the sample needs to match the piece delivered and the further away you get from the natural wood tone the more important it is. 

Always make a few samples from different part of the timber to see if the stain or finish penetrates the wood in the same way and make careful notes of which cut or part of a board works with that finish.

The Tree of Heaven Project - Stock

After 14 months air drying and a few weeks in the kiln, the processed boards of the Ailanthus tree are nearly ready to use.  Now the timber has been moved to the workshop for further acclimatisation.

The wood has fared well through the process bar a few shakes and splits, the majority of which occurred shortly after milling. The boards where cut through with the chainsaw and I remember watching as the tension in the timber pull the boards apart almost as soon as they hit the ground.

Of all the boards that were milled, the top half of the tree, a wind swayed section seen in the above photo is very curved compared to the straight portion of the lower drunk.  The client has requested a pretty modernist design for a desktop and the natural curve in the timber is sadly not appropriate to use this time around.

The Tree of Heaven Project - The project

The Tree of Heaven Project or the Ailanthus Project is comprehensive research and development project to process and reuse the timber from a tree felled in a family garden in Kensington, West London.

The Ailanthus grew steadily in the back garden a Kensington home for more than 50 years.  A young family moved in with two boys, who spent most of their childhood climbing, swinging from, sheltering under and generally admiring the tall tree and its generous canopy.

Two years ago the owners identified a fungal disease in the base of the tree and sadly the tree was marked for felling before it fell down and hurt somebody.  Rather than shipping in tree surgeon for quick chopping down and throwing the timber into the woodchipper, the owners decided to do something different.

To honour the unique provenance of the tree and their collective family memory, they decided to save the trees timber and engage woodworker and an architect to make the best use of the timber.  The timber will be used to make two writing desks along with numerous architectural details including stair rails and counters.

The Tree of Heaven Project - Ailanthus Altissima

THE TREE

Ailanthus altissima /eɪˈlænθəs ælˈtɪsɪmə/, commonly known as tree of heaven, ailanthus or varnish tree is a deciduous tree in the family Simaroubaceae. 

Unlike other members of the genus Ailanthus, the Altissima is found in temperate climates rather than the tropics, and native to central and north east China as well as Taiwan.  From the 1700s onwards it has been cultivated in North America and Europe.

Its appearance most resembles the European Ash, with its pale, yellow white timber and its fans of pinnately compound leaves.

 PEST

The Ailanthus is not a popular tree, not amongst horticulturists and not among the random people responding to my social media posts and blogging.  It is extremely invasive when it is planted in non-native places it upsets the local ecosystems in numerous ways.  Not only does it propagate much faster than the native species it has crowded next too but also secretes chemicals into the soil to kill off its rivals and any animal species it might consider a threat, potentially leading to extinctions and/or negatively effecting bio-diversity.

In the urban environment, where our tree had been growing for 50 years plus, the tree can cast itself across various gardens and parks, causing the same problems as in rural areas plus it can hit the built environment.  Numerous cases have been recorded of the Ailanthus tree spreading its roots under the foundations of buildings, causing damag to the houses and also sewer systems and pulling up pavements.

Its quite a git.

The Royal Horticultural Society advises “If you already have these species in your garden or on your land, you are not likely to be prosecuted simply for having them. However, you are advised to control them and, for those 36 plants listed by EU, you are required to take all possible steps to remove them, even if you didn’t plant them. It is also your responsibility to ensure that they are not allowed to spread.”

EU Regulation lists the Ailanthus as an Invasive Alien Species. This legislation still applies in the UK. It lists Ailanthus altissima as one of 36 plants that you should not plant or cause to grow in the wild but in addition are banned from sale and gardeners possessing them should undertake measures to control them.  

The Tree of Heaven Project - Re-milling & yield count

Yesterday we remilled and sticked the timber from the Ailanthus tree felled in Kensington earlier this month. A small tree, of a species we didn't know has afforded us a generous yield. Wide 35mm boards, endless short 54mm boards and 75mm x 75mm posts. And some interesting blanks for turning too! Thanks again to Mike and everyone at @goldfinchfurniture for helping me with this early stage of the project.

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

View fullsize

The Tree of Heaven Project - Milling Day

I was back in Kensington today to help mill the Ailanthus tree that was felled last week. And by help I mean marking up pieces of tree with chalk and watching experts convert it into usable timber. I learnt alot today and I am optimistic that the yield has been maximised.

The mill and the Milling

The milling was hard going, the sapwood is very gummy, especially just beneath the bark and the chainsaws clogged and became blunt after two 2 metre passes. The mill operators were slowed down considerably and needed to return the following week to finish the job.

Shakes or cracks in the timber are the most common challenge when it comes to converting threes into usable timber.  Heart shakes occur along the centre of the tree, where it’s the oldest and most fragile.  The middle boards, and especially the very centre board is susceptible to this and when we placed our central board onto the sticked pile there was a very loud crack as the board parted down the middle.  Although this a challenge to the yield, the central board obviously very wide compared with the outer ones so two lengths of usable timber can be taken either side of the crack.

The other boards fared well with the exception of a few felling shakes at their extremities, and but only 10 to 15cm from the ends. Felling shakes caused by the trauma of the felling process

The Timber

As a European furniture maker, I know very little about the Tree of Heaven and in the next few weeks I endeavour to educate myself.  I had read that the timber resembled European Ash and was noxious when milling.  As we started to mill through the body of the trunks, the characteristics of this Ailanthus tree started to reveal itself. Although, the timber was not smelly at all when cut, the timber did indeed resemble the pale, grey-yellow of Ash.  The very heart is a golden brown and the sapwood paler than the main body but similar enough that some will be robust enough for use.

Yield

There are numerous blanks ideal for turning, especially those cut from the confluence of the limbs or trunk and limbs, where the timber is more colourful and varied in its figure. Elsewhere, there are potential greenwood working opportunities and at the bottom of the priorities, some rounds and odd shaped but small pieces for outdoor furniture.